dxf

DXF generation and validation

Provenance: maintained in earthtojake/text-to-cad. Use the installed local skill files as the runtime source of truth; the repository link is only for provenance and release review.

Purpose

Create or modify 2D DXF drawings from natural-language requirements or from CAD geometry, generate validated .dxf artifacts, and return checked outputs. DXF sources are Python files defining gen_dxf() returning an ezdxf document; the CLI owns output paths.

Two source shapes are supported:

• Standalone drafting: a Python source defining only gen_dxf(). Use for pure 2D outputs — gaskets, panels, templates, cut layouts — with no 3D model behind them.
• CAD projection: a gen_dxf() added to a CAD generator source that also defines gen_step(). Use when the DXF is a drawing or profile of a 3D part; create and validate the STEP geometry with $cad first, then add the projection in the same source file.

Use this skill when

Use this skill when the user asks for DXF files, 2D drawings, profiles, outlines, templates, gaskets, panels, flat patterns, or cut layouts for laser, plasma, waterjet, or CNC routing.

Use $cad for the 3D part or assembly a DXF derives from. Use $sendcutsend for SendCutSend-specific upload preflight.

Defaults

Use these defaults unless the user specifies otherwise:

• Units: millimeters; set them explicitly on the document (doc.units = ezdxf.units.MM).
• Geometry lives in modelspace at 1:1 scale.
• Cut profiles are closed polylines or closed line/arc loops; open contours only for engraving or reference geometry.
• Layers carry intent: keep cut geometry and bend/fold lines on separate layers, and include "bend" in bend-layer names so downstream tools classify them as bends rather than cuts.
• DXF layers are drawing structure, not STEP part/assembly structure.

Tool

The launcher lives in the DXF skill directory:

python scripts/dxf targets... [flags]

Use the active project Python interpreter; treat python as an interpreter placeholder, and use --help for the full interface. Target paths resolve from the command's current working directory; run from the workspace that owns the artifacts with cwd-relative target paths. Keep a DXF output and its Python generator in the same directory with the same basename unless the user requests otherwise.

A DXF target is a Python source defining:

def gen_dxf():
    ...
    return document

Plain generated Python targets write sibling .dxf outputs. Use -o/--output only with one plain generated Python target, or use SOURCE.py=OUTPUT.dxf positional pairs for per-target custom outputs. Do not put output paths in the gen_dxf() return value.

scripts/dxf is a generator; it does not inspect existing .dxf files. For existing DXF inspection, use ezdxf for entity/layer checks and $cad-viewer for visual review.

Workflow

1. Convert the request into a short brief: outline dimensions, holes and slots, layers, units, output path, and validation targets.
2. For CAD projections, generate and validate the STEP geometry with $cad first, then add or update gen_dxf() in the same source.
3. Write or edit the Python source with meaningful dimensions as named parameters.
4. Run scripts/dxf on explicit Python source targets only; do not run directory-wide generation.

python scripts/dxf path/to/source.py
python scripts/dxf path/to/source.py -o path/to/output.dxf
python scripts/dxf path/to/a.py=out/a.dxf path/to/b.py=out/b.dxf

1. Validate the generated DXF deterministically, then hand off and report.

Validation

Verify the generated file with targeted ezdxf checks instead of eyeballing: entity counts by type and layer, closed flags on cut profiles, drawing extents, and every dimension the user specified.

import ezdxf

doc = ezdxf.readfile("path/to/output.dxf")
msp = doc.modelspace()
profiles = [e for e in msp.query("LWPOLYLINE") if e.closed]
holes = msp.query('CIRCLE[layer=="0"]')

Report only checks that actually ran.

Handoff

After creating or modifying .dxf artifacts, you must ALWAYS hand the explicit file path(s) to $cad-viewer when that skill is installed and include its live viewer link(s) in the final response. If $cad-viewer is unavailable or startup fails, report that and rely on ezdxf checks instead of silently omitting the handoff.

Final responses should include generated files, returned viewer links, validation actually run, and assumptions.